Search Results

Technical Data:
Batch # Gi4586 Tolerance on diameter ±2% (±4% by weight). Tensile strength 2783 N/mm2. Resistance 5560 Ohm/m. Elongation 0.8%. Weight 0.048 - 0.051 (mg/200mm). Straightened and electrolytically etched to final size. Reels of length 1m, 10m, & 50m Typical analysis ppm:Al<15,Ca<1,Cr<5,Cu<1,Fe<20,Mg<1,Mn<1,Ni<5,Si<5,Sn<1,Na<10,K<70, Mo<8 balance W

Technical Data:
Non-sag quality wire containing minimum 99.95% W, doped with Potassium, Silicon & Aluminium. Straightened and electrolytically cleaned. Straightness grade 1. Tolerance on diameter ±1%. Weight tolerance on diameter ±2%. Batch No. Gi4140 Tensile strength 3035 MPa. Elongation 1.9%. Resistance 64.8 Ohm/m. Actual analysis batch # Gi4140 ppm:C 18, Na <5, N2 <10, O2 <10, K 60.1, Mo <8, Bi <1, Cd <1, Co <1, P <1, Pb <1, Al 11, Ca <1, Cr 3, Cu <1, Fe 7, Mg <1, Mn <1, Ni 4, Si 4, Sn <1. W balance 99.95% min.

Technical Data:
Non-sag quality wire containing minimum 99.95% W, doped with Potassium, Silicon & Aluminium. Straightened and electrolytically cleaned. Straightness grade 1. Tolerance on diameter ±1%. Weight tolerance on diameter ±2%. Batch No. Gi4141 Tensile strength 2845-2883 MPa. Elongation 1.3-1.8%. Resistance 52.6 Ohm/m. Typical analysis ppm:Al 5,Ca<1,Cr<1,Cu<1,Fe 5,Mg<1,Mn<1,Ni<1,Si 1,Sn<1,Na<5, K 65,Mo<8. W balance 99.95% min.

Technical Data:
POA = Price on application. Batch No. Gi4035 Non sag wire doped with K,Si & Al. Tensile strength 2427 MPa. Elongation 3.6%. Tolerance on diameter ±1% (±2% by weight). Resistance 3.0 Ohms/m Straightness grade 1, 95cm/1m. Batch No.Gi4035 actual analysis ppm: C<10, Na<5, N2<10,O2<10, K 63.5 (Average) , Mo<8, Bi<1, Cd<1,Co<1, P<1, Pb<1, Al 13, Ca<1,Cr 3, Cu<1, Fe 5, Mg<1,Mn<1, Ni 2, Si 3, Sn<1. balance Tungsten 99.986%.

Technical Data:
POA = Price on application. Batch No. Gi4051 Non sag wire doped with K, Si & Al. Tolerances: length ±0.5mm bow 0.25 - Diameter ±1% (±2% by weight) Elongation 2.4-2.6%. Tensile strength 2352 - 2389 MPa. Resistance 5.40 Ohms/m. Batch No.Gi4051 Analysis ppm: C<10, Na<5, N2<10,O2<10, K 63.3 (Average) , Mo<8, Bi<1, Cd<1,Co<1, P<1, Pb<1, Al 9, Ca<1,Cr 3, Cu<1, Fe 6, Mg<1,Mn<1, Ni 3, Si 4, Sn<1

Technical Data:
Tolerances: Length ±0.5mm, bow ±0.025mm. Typical analysis ppm:Al 5,Ca<1,Cr<1,Cu<1,Fe 5,Mg<1,Mn<1,Ni<1,Si 1,Sn<1,Na<5,K 65,Mo<8. W balance 99.95% minimum.

Technical Data:
Tolerances: length ±0.5mm, bow ±0.025mm. Typical analysis ppm:Al 5,Ca<1,Cr<1,Cu<1,Fe 5,Mg<1,Mn<1,Ni<1,Si 1,Sn<1,Na<5,K 65,Mo<8. W balance 99.95% minimum.

Technical Data:
Analysis refers to Tungsten core only. Batch # Gi1645 Tensile strength 2000 MPa. Elongation 2.1%. Typical analysis ppm: Al <15, Ca <1, Cr <5, Cu <1, Fe <20, Mg <1, Mn <1, Ni <5, Si <5, Sn <1, Na <10, K70, Mo <8 balance W

Technical Data:
POA = Price on Application. Maximum size 300mm x coil

Technical Data:
POA = Price on Application. Maximum size 300mm x coil