Search Results

Technical Data:
Tolerance on thickness ±0.015mm. POA = Price on application. Guaranteed chemical analysis ppm: Al <15 Fe <30, Si <20, H <5, Cd <5, Cr <20, K <10, Mo <100, N <5, Hg<1, Cu <10, Ni <20, C <30, O <30, Pb <5. W 99.97% without Mo.

Technical Data:
Batch No. Gi5565 Tensile strength 1906.5 MPa. Elongation 6.18% Break load 50.540Kg. POA = Price on application. Tolerances: thickness ±0.005mm, width ±0.025mm. Typical analysis ppm:Al 18,Ca 2, Co 250,Cr 6,Cu 10,Fe 19,Mg 2,Mn 2,Mo 60,Ni 26,Pb 2, Si 5,Sn 3, Ti 10,Zr 15, W balance 99.957%

Technical Data:
Analysis Gi5132 ppm: Ni1.6, C 0.2, Nb 2.1, Mo 9.1, Ru 0.1, Ba 0.8 Ta 0.2, Pt 0.6, Au 15.8, Pb 0.5, Bi 0.2, Th 2.7, balance W 99.996+% . Break load: 46.630Kg. Tensile Strength: 2191.6MPa. Elongation: 5.7%.

Technical Data:
Tensile strength 2066.7MPa. Elongation 2.83% 52.016 Kg Break load. POA = Price on application. Tolerances: thickness ±0.005mm, width ±0.025mm. Typical analysis ppm:Al 18,Ca 2, Co 250,Cr 6,Cu 10,Fe 19,Mg 2,Mn 2,Mo 60, Ni 26,Pb 2, Si 5,Sn 3, Ti 10,Zr 15, W balance 99.957%

Technical Data:
POA = Price on application. Tolerances: thickness ±0.0075mm, width ±0.025mm. Tensile Strength: 1922MPa, Break load: 59.929Kg, Elongation: 5.89% Actual analysis Gi4950 ppm:Li 8.4, B 28.2, Na 47.6, Ni 0.6, As 0.5, Se 1.0, Rb 0.1, Nb 2.1, Mo 1.9, Re 13.6, Pt 0.1, Au 21.5, Pb 0.2, Th 6.1. Balance W 99.987%

Technical Data:
POA = Price on application. Lapped & damond polished one side. Surface finish <0.01 Ra (µm). Typical analysis ppm: Al<20,Ca<30,Cr<20,Cu<20,Fe<30,Pb<20,Mg<20, Mn<20,Ni<30,Si<20,Sn<20,Ti<20,C<50 W 99.95% min.

Technical Data:
POA = Price on application. RoHS Compliant. Water Jet Cut - Tolerance on width & length ±2.0mm. Hardness >450 HV. Typical analysis ppm: Al 1, Cr 3, Cu 1, Fe 8, K 1, Mo 12, Ni 2, Si 1, C 6, H 0, N 1, O 2, Cd 1, Hg 0, Pb 1. Tungsten Min 99.99% Guaranteed analysis ppm: Al 15, Cr 20, Cu 10, Fe 30, K 10, Mo 100, Ni 20, Si 20, C 30, H 5, N 5, O 20, Cd 5, Hg 1, Pb 5. Tungsten 99.97%.

Technical Data:
Tolerances: 0.005mm(±2%) , by weight (±4%). Etched & straightened wire. Typical analysis ppm:Al<15,Ca<1,Cr<5,Cu<1,Fe<20,Mg<1,Mn<1,Ni<5,Si<5,Sn<1,Na<10,K<70, Mo<8 balance W

Technical Data:
POA = Price on application. Batch No. Gi4454 Resistance 1140 ohms/m. Tensile strength 3035 MPa. Elongation 0.4%. Straightened & electrolytically etched. Straightness 90cm/1m. Typical analysis ppm:Al<15,Ca<1,Cr<5,Cu<1,Fe<20,Mg<1,Mn<1,Ni<5,Si<5,Sn<1,Na<10,K<70, Mo<8 balance W