Search Results

Technical Data:
Tolerance on diameter ±0.003mm. Tensile strength 104 N/mm2 Yield strength at 1% 74 N/mm2 Elongation 18.2%. D.C. Resistance IEC 9.058 - 9.148 Ohm/m. Typical analysis ppm:Si 200, Fe 1400, Cu 20, Mn 10, Mg 8, Cr 7, Zn 50, Ti 1, balance Al min 99.5%.

Technical Data:
Tolerance on diameter ±0.010mm. Typical analysis ppm:Si 200, Fe 1400, Cu 20, Mn 10, Mg 8, Cr 7, Zn 50, Ti 1, balance Al min 99.5%. *Batch Gi4173* Tensile strength 103 N/mm² , Yield strength at 1% 76 N/mm² , Elongation 27%, D.C Resistance IEC 0.3515 Ohms/m.

Technical Data:
Typical analysis ppm: Si 400, Fe 1500, Cu 20, Mn 10, Mg 10, Ni 30, Zn 100, Ti 10, V 10, B 60,Ga 100, Pb 10. TMI Al 99.81%. Al Balance.

Technical Data:
Measured Metallic impurities in ppm: Ag 0.005, B 0.014, Ca 0.026, Cr 0.097, Cu 1.19, Fe 0.307, Ga 0.016, Mg 0.178, Mn 0.047, Ni 0.009, Si 1.31, Ti 0.018.TMI 3.2331ppm. Balance 99.99968%

Technical Data:
Measured Metallic impurities in ppm: Ag 0.005, B 0.014, Ca 0.026, Cr 0.097, Cu 1.19, Fe 0.307, Ga 0.016, Mg 0.178, Mn 0.047, Ni 0.009, Si 1.31, Ti 0.018.TMI 3.2331ppm. Balance 99.99968%

Technical Data:
Measured Metallic impurities in ppm: Ag 0.005, B 0.014, Ca 0.026, Cr 0.097, Cu 1.19, Fe 0.307, Ga 0.016, Mg 0.178, Mn 0.047, Ni 0.009, Si 1.31, Ti 0.018.TMI 3.2331ppm. Balance 99.99968%

Technical Data:
POA= Prices on application. Actual analysis batch No. Gi4444 ppm: Ag <0.005, As 0.026, B 0.029, Ba <0.005, Be <0.005, Bi <0.005, Ca 0.032, Cd <0.05, Ce 0.372, Cl <0.1, Co <0.005, Fe 1.09, Cr 0.055, Cs <0.01, F <0.1, Fe 1.09, Ga <0.005, Ge <0.04, Hg <0.1, In <0.005, K <0.1, La 0.23, Li <0.005, Mg 0.844, Mn 0.07, Mo <0.005, Na <0.005, Nd 0.056, Ni 0.037, O <10, P 0.917, Pb <0.005, Pd <0.1, Pt <0.1, S <0.1, Sb 0.007, Si 1.72, Sn <0.05, Ti 0.05, V 0.037, W <0.025, Zn <0.05, Zr 0.008.OES: Cu <0.43, C <2(GDMS), N <1(LECO), H2 <0.3(H-mat 2020), U+Th <0.2 (GDMS) TMI<10ppm Al 99.999%.

Technical Data:
Tube in coils ~600mm diameter Typical analysis ppm: Si 400, Fe 1900 Mn 30, Cr 10, Zn 140, B 60, Ga 90 (Bal. Al 99.74%).