Skip to content

Spotlight on Indium: Foil, Wire and Ingots for Research

Carli Goodfellow

Indium is a soft, silvery post-transition metal with a melting point of 156.6 °C and a Mohs hardness of 1.2, soft enough to cut with a knife at room temperature. It stays ductile at cryogenic temperatures, which is why it is widely used for vacuum seals and thermal joints in low-temperature equipment. It is also a starting material for indium tin oxide films and for III-V semiconductors such as indium phosphide. Advent supplies it as foil, wire and ingots, all at 99.99% purity or above.

Indium has atomic number 49, a density of about 7.3 g/cm³ and a boiling point of about 2,070 °C. The properties researchers use most are mechanical. Indium deforms under very low loads, so a wire or foil compressed between two surfaces flows into small irregularities and fills them, and it still does so at cryogenic temperatures, where elastomer seals become unreliable. It also conducts heat and electricity, so a compressed indium layer can make thermal or electrical contact as well as a seal.

Those advantages come with limits. Indium creeps: under sustained pressure it keeps deforming slowly, and how much depends on the load and the temperature. Its low melting point caps its working temperature well below that of most metals, and a thin oxide forms on its surface in air, which flux can remove when soldering. Below 3.41 K indium becomes superconducting.

Where indium is used in research

  • Cryogenic and vacuum sealing. Indium wire is compressed between flanges to make vacuum-tight joints in cryostats, and foil is used as a thermal interface between components.
  • Soldering and bonding. Indium and its alloys are used as low-melting solders. Indium is also used to bond ceramic sputter targets to their backing plates, giving an electrical and thermal connection.
  • Transparent conducting films. Indium tin oxide, indium oxide doped with tin, combines optical transparency with electrical conductivity and is used in displays.
  • Compound semiconductors. Indium phosphide is used both as a substrate and as grown layers, and indium gallium arsenide is usually grown as thin layers on indium phosphide, for photonic and high-speed electronic devices.
  • Low-melting alloys. Indium is a constituent of galinstan, a gallium-indium-tin alloy that is liquid at room temperature.

Our earlier articles on indium behind display screens, indium in additive manufacturing and indium from cryogenic seals to compound semiconductors give worked examples.

Choosing the right form

The most suitable form depends on the geometry, thickness and purity the application needs.

  • Foil: from 0.045 mm to 2.0 mm thick, in 18 products. Suited to thermal interfaces and to gaskets or shims cut to shape. One 0.25 mm product is supplied as a coil 25 mm wide, and foil can also be supplied cut into discs.
  • Wire: from 0.25 mm to 4 mm diameter, in 10 products. Suited to seals formed into a ring or loop between flanges, and to soldering. Seal grooves are usually sized to suit the wire diameter.
  • Ingots: two products, at 99.99% and 99.999%. Suited to work that starts from melting the metal, such as alloying or casting. Ingot dimensions are not given on the product page, so please ask.

Indium is soft in every form, so thin foil and fine wire are easily creased or stretched and need careful handling.

Indium purity and specifications

Advent's indium is listed at 99.99%, 99.99+% and 99.999%, and one 0.25 mm foil at 99.9987+%. Foil and ingots are available at 99.99% and 99.999%, foil also at 99.99+%, and wire at 99.99+% and 99.999%.

Not every thickness or diameter is offered at every purity. For example, 0.25 mm and 0.5 mm wire are listed only at 99.999%, while 0.6 mm and 4 mm wire are listed only at 99.99+%; 0.045 mm foil is listed at 99.99% and 0.08 mm foil at 99.999%.

A purity figure does not say which impurities are present. Many product pages give a typical analysis in ppm, so please check the individual product against your specification before ordering.

Looking for indium for your research?

Tell us the form, dimensions, purity and quantity you need. Contact Advent Research Materials

Frequently asked questions